Voltage

Treat electric energy as a height you can read off a map.

The electric field is a map of arrows, and arrows are hard work: to follow a charge through it you add up a force that changes at every step. Mechanics had the same trouble until energy turned a whole journey into one line of arithmetic. The same trick works here. Give every point a single number, a height, and the charge's speed comes from how far it has dropped. That height is the voltage. It's the number printed on every battery and plug.

The land round two charges on a table 6 m by 4 m, with height standing for voltage. Drag the amber proton anywhere and let go. Drag a charge to move it, and use the sliders to change its size. Each charge is spread through a ball half a metre in radius, so its hill has a rounded top instead of climbing for ever. The proton really moves across the flat table: the height is only a way of drawing its energy. The film is slowed about 90,000 times for the proton and about 4 million times for the electron.
  • Watch the proton go. It runs off the hill, drops through the pit and climbs out the far side. On the scale at the right, the amber bar is how far below its start it is, and that is its kinetic energy.
  • Press Pause at any moment and read off how many volts it has come down. Its speed in km/s is 13.84 times the square root of that number, wherever it is and however it got there. (13.84 km/s is a proton's speed after a drop of 1 V.) Try it from a few different starting places.
  • The dashed amber line is the height it started at. Let it go from several places and watch: it never gets back above that line.
  • Switch to the electron. It runs the other way, up the hill, and can never get below its line.
  • Switch back to the proton and make both charges positive. Now there are two hills with a pass between them. Put the proton as near the top of the pass as you can. Dead on the top it stays where it is, and the readout says why. A step to either side and it creeps off, slowly at first, then runs away downhill.
  • Slide "Look from" all the way to the right. From straight above, the land is a map, and the height lines are the contours. They crowd together where the slope is steep.
  • Still looking from above, tick "Show the field as arrows". Every arrow points downhill, and every one crosses the height lines square on.

Energy for each coulomb

Lift a mass \(m\) through a height \(h\) and you store \(mgh\) of potential energy in it. Twice the mass stores twice the energy, so the useful thing to know about a place is the energy for each kilogram, \(gh\). That's called the gravitational potential, though you rarely hear the name. Its electrical twin is on every battery.

Push a charge \(q\) against an electric field and you store potential energy \(U\) in it too. Twice the charge stores twice the energy. The energy for each coulomb of charge is the voltage, \(V\):

\[ V = \frac{U}{q} \qquad\qquad U = qV \qquad\qquad 1 \text{ volt} = 1 \text{ joule per coulomb} \]

So a 1.5 V cell gives 1.5 J to every coulomb that passes through it, and a 12 V car battery gives 12 J. The height's full name is the electric potential, and later lessons write it \(\phi\). A voltage, strictly, is the difference between two heights.

As with any height, only differences matter. You can call sea level zero, or the floor of the room, and every drop comes out the same. For charges on their own, zero is usually taken to be far away from all of them. In a circuit it's the battery's − end.

Speed from the drop

In the figure the only force on the proton is the electric one, so its kinetic energy plus its potential energy never changes. Small \(v\) is its speed and capital \(V\) is the voltage where it is.

The total is the same at every moment:

\[ \tfrac{1}{2}mv^2 + qV = \text{the same all the way along} \]

It starts at rest, where the voltage is \(V_{\text{start}}\). So all it has to begin with is \(qV_{\text{start}}\):

\[ \tfrac{1}{2}mv^2 + qV = qV_{\text{start}} \]

Take \(qV\) from both sides. Write \(\Delta V\) for the drop, \(V_{\text{start}} - V\):

\[ \tfrac{1}{2}mv^2 = q\,\Delta V \]

Multiply by 2, divide by \(m\) and take the square root:

\[ v = \sqrt{\frac{2q\,\Delta V}{m}} \]

This is \(v = \sqrt{2gh}\) from the energy track again, with the energy for each kilogram, \(gh\), swapped for the energy for each kilogram that the charge picks up, \(\frac{q\,\Delta V}{m}\). The route doesn't appear, and neither does the time.

A negative charge turns the picture upside down. Its energy \(qV\) is lowest where \(V\) is highest, so it's pushed up the hill, and what it gains is the size of its charge times the height it has climbed. That's the electron in the figure.

The electron-volt

A proton's charge is \(e = 1.60 \times 10^{-19}\) C, and an electron's is \(-e\). When either one moves through 1 volt, its energy changes by

\[ 1.60 \times 10^{-19} \text{ C} \times 1 \text{ V} = 1.60 \times 10^{-19} \text{ J} \]

That tiny amount is the electron-volt, eV. It saves a lot of arithmetic: a proton that has come down 20 V has gained 20 eV, with nothing to work out. Atoms and particles are measured in it. The energy that holds two atoms together in a molecule is a few eV, an X-ray tube gives each electron about 100,000 eV, and the Large Hadron Collider gives each proton 6.8 million million eV.

The hill round one charge

The field of a charge \(q\) is \(E = \frac{kq}{r^2}\). To find the height of its hill at a distance \(r\), bring a small test charge \(q_t\) in from far away and add up the work.

At a distance \(x\), the charge \(q\) pushes the test charge away with a force

\[ F = \frac{kq\,q_t}{x^2} \]

You have to push against that all the way in from far off to \(r\). The force changes as you go, so the work is an integral. Pushing it in against the force takes exactly the work the force would do pushing it back out, so add that up from \(r\) out to far away:

\[ W = \int_r^\infty \frac{kq\,q_t}{x^2}\,dx \]

\(\frac{1}{x^2}\) integrates to \(-\frac{1}{x}\). Far away, \(\frac{1}{x}\) has shrunk to nothing, so the far end gives 0. The near end gives \(-\frac{kq\,q_t}{r}\), and the integral is the far end minus the near end. It's the same integral that gave the energy of an orbit:

\[ W = \left[-\frac{kq\,q_t}{x}\right]_r^\infty = 0 + \frac{kq\,q_t}{r} \]

That work is now stored as the test charge's potential energy. Divide by \(q_t\) to get the energy for each coulomb:

\[ V = \frac{kq}{r} \]
\[ V = \frac{kq}{r} \qquad\qquad k \approx 8.99 \times 10^9 \text{ N m}^2/\text{C}^2 \]

with \(V = 0\) far away. A positive charge makes a hill and a negative one a pit.

It falls off as \(\frac{1}{r}\), more gently than the field's \(\frac{1}{r^2}\). One nanocoulomb gives 8.99 V a metre away, which is why the figure's charges are a few nanocoulombs.

With several charges, add the heights. This is the real gain. Fields are arrows, and adding them means components and angles. Heights are plain numbers, and a pit simply subtracts from a hill.

In the figure each charge is a ball, not a point. Outside the ball nothing changes: Gauss's law, which finds a field from its symmetry, says a ball of charge acts like a point charge at its centre. Inside, the hill rounds off.

Height lines and the field

A height line joins points at the same voltage. Its proper name is an equipotential. Moving a charge along one changes no energy, so it takes no work, so the force has no part pointing along the line. That leaves only one way for the field to point: straight across. Field arrows always cross equipotentials square on, and they point downhill.

How strong the field is depends on how steep the land is. Along a straight line,

\[ E = -\frac{dV}{dx} \]

and on a map the field is minus the gradient of the voltage, \(\mathbf{E} = -\nabla V\). The minus sign says downhill. You can check it on the single charge: differentiating \(\frac{kq}{r}\) gives \(-\frac{kq}{r^2}\), and minus that is the field you started from.

It also gives the field a second unit. Volts per metre are the same thing as newtons per coulomb. Between two flat metal plates the field is the same everywhere, so the slope is simply the voltage across them, \(V\), divided by the gap between them, \(d\):

\[ E = \frac{V}{d} \]

Put 9 V across plates 1 mm apart and the field between them is \(\frac{9}{0.001} = 9{,}000\) V/m.

The route doesn't matter

To carry a charge \(q\) from a point A to a point B, you do work equal to the potential energy it gains:

\[ W = q\,(V_B - V_A) \]

Nothing in that formula mentions the path.

A charge of one nanocoulomb is carried from A to B along the amber route, over the land round a +2.5 nC and a −2 nC charge. On the right is the same route laid out flat, as height against distance walked. Drag A, B, or the amber point in the middle of the route. The charge is carried slowly, so it has no kinetic energy to speak of.
  • Drag the amber point about. The route gets longer or shorter, and the readout's "climbs" and "comes down" change with every move. The net change and the work stay at +9.9 V and +9.9 nJ.
  • Compare the dashed straight route. It goes right over the hill, climbing more than 50 V, and comes most of the way back down. The net is the same.
  • The dotted white line is A's height line: every place at the same voltage as A. Drag B onto it. Now the trip takes no work at all, however it wanders.
  • Drag B on top of A. Any round trip comes to exactly nothing.
  • Drag B away again and carry −1 nC instead. The heights don't change, but the work changes sign: climbing now gives energy back.

There's a reason it has to be this way. If one route from A to B cost less work than another, you could carry a charge up the cheap one, let it run back down the dear one, and collect the difference on every lap for ever. Energy doesn't come free, so every route must cost the same. Friction is different, as it was on the energy track, and so there is no such thing as a "friction voltage".

This is for the field of charges that are sitting still. A changing magnetic field makes a different kind of electric field, which does push charge round a loop. The energy then comes from whatever is changing the magnet's field, and that's induction.

In the language of line integrals, the work the field does is the part of its force along each small step, added up along the path. The voltage is what that sum always comes to:

\[ V_B - V_A = -\int_A^B \mathbf{E}\cdot d\mathbf{l} \]

The size of a volt

A door handle at several thousand volts is harmless and the mains at 230 V can kill, because voltage is only the energy for each coulomb. The handle holds very little charge. The mains will supply as much as you let it.

Voltage is the bookkeeping that makes circuits possible: the next lesson is this landscape bent round into a loop. It also outlasts the idea of force. In quantum mechanics a particle has no definite path for a force to act along, and Schrödinger's equation is written with the potential energy \(qV\) instead. Three lessons on, you'll see that magnetism needs a potential of its own, with a direction, and that an electron can respond to a potential in a place where there is no field at all.

Problems

A 9 V battery pushes 0.20 C of charge through a radio. How much energy does it give that charge? How much does each electron get, in electron-volts and in joules?

Answer

\(U = qV = 0.20 \times 9 = 1.8\) J. Each electron moves through 9 V, so it gets 9 eV, which is \(9 \times 1.60 \times 10^{-19} = 1.44 \times 10^{-18}\) J.

Find the voltage 0.50 m from a charge of +2.0 nC, and 1.0 m from it. How far away is it 9.0 V? (\(1 \text{ nC} = 10^{-9}\) C.)

Answer

\(kq = 8.99 \times 10^9 \times 2.0 \times 10^{-9} = 17.98\) V m. At 0.50 m, \(V = \frac{17.98}{0.50} \approx 36\) V. At 1.0 m it's half that, about 18 V. For 9.0 V, rearrange \(V = \frac{kq}{r}\) to \(r = \frac{kq}{V} = \frac{17.98}{9.0} \approx 2.0\) m. Twice as far, half the voltage.

Charges of +2.0 nC and −2.0 nC are 2.0 m apart. What's the voltage halfway between them? Is the field zero there? Then find the voltage on the line between them, 0.50 m from the positive one.

Answer

Halfway, each is 1.0 m away. The heights are \(+17.98\) V and \(-17.98\) V, which add to zero. The field is not zero: both charges push a positive test charge the same way, towards the negative one, with \(\frac{kq}{r^2} = 17.98\) N/C each, so the field is about 36 N/C. Zero height doesn't mean level ground. The halfway point is on a slope that happens to cross sea level.

At 0.50 m from the positive charge you are 1.5 m from the negative one: \(V = \frac{17.98}{0.50} - \frac{17.98}{1.5} = 35.96 - 11.99 \approx 24\) V.

A proton (\(m = 1.67 \times 10^{-27}\) kg) starts from rest and comes down 100 V. How fast is it going? What about an electron (\(m = 9.11 \times 10^{-31}\) kg) that starts from rest and climbs 100 V? Both have a charge of size \(1.60 \times 10^{-19}\) C.

Answer

Each has gained 100 eV, which is \(100 \times 1.60 \times 10^{-19} = 1.60 \times 10^{-17}\) J. For the proton, \(v = \sqrt{\frac{2 \times 1.60 \times 10^{-17}}{1.67 \times 10^{-27}}} = \sqrt{1.916 \times 10^{10}} \approx 1.38 \times 10^5\) m/s, or 138 km/s. For the electron, \(v = \sqrt{\frac{2 \times 1.60 \times 10^{-17}}{9.11 \times 10^{-31}}} = \sqrt{3.513 \times 10^{13}} \approx 5.93 \times 10^6\) m/s, about 2% of the speed of light. Same energy, but the electron is 1,800 times lighter.

In the second figure as it first appears, A is at 6.4 V and B is at 16.3 V. How much work does it take to carry +1 nC from A to B? And −1 nC? And +3 nC from B back to A? Check the first two on the figure.

Answer

From A to B the voltage rises by \(16.3 - 6.4 = 9.9\) V. For +1 nC, \(W = 1 \times 10^{-9} \times 9.9 = 9.9 \times 10^{-9}\) J, which is 9.9 nJ. For −1 nC it's −9.9 nJ: the field pulls a negative charge uphill, so you'd have to hold it back. From B to A the change is \(-9.9\) V, so for +3 nC, \(W = 3 \times (-9.9) = -29.7\) nJ. None of these depends on the route.

Two metal plates 2.0 mm apart are connected to a 12 V battery. What's the field between them? What force does it put on an electron? An electron starts from rest at the negative plate. How much energy has it gained when it reaches the positive one, and how fast is it going?

Answer

\(E = \frac{V}{d} = \frac{12}{0.0020} = 6{,}000\) V/m. The force is \(qE = 1.60 \times 10^{-19} \times 6000 = 9.6 \times 10^{-16}\) N. It climbs 12 V, so it gains 12 eV, which is \(12 \times 1.60 \times 10^{-19} = 1.92 \times 10^{-18}\) J. Then \(v = \sqrt{\frac{2 \times 1.92 \times 10^{-18}}{9.11 \times 10^{-31}}} = \sqrt{4.215 \times 10^{12}} \approx 2.05 \times 10^6\) m/s. The gap between the plates didn't come into the last two answers. Only the 12 V did.

Learn more

An unhandled error has occurred. Reload 🗙